Witaj, Gość
Musisz się zarejestrować przed napisaniem posta.



Szukaj na forum

(Zaawansowane szukanie)

» Użytkownicy: 10,172
» Najnowszy użytkownik: Dowkeraq1
» Wątków na forum: 230
» Postów na forum: 390

Pełne statystyki

Użytkownicy online
Aktualnie jest 20 użytkowników online.
» 0 Użytkownik(ów) | 20 Gość(i)

Ostatnie wątki
Pranie dywanów
Forum: Zapytaj Deana
Ostatni post: heniutek
08-17-2019, 09:58 PM
» Odpowiedzi: 0
» Wyświetleń: 506
Jakie filmy i seriale ogl...
Forum: Angielski w mediach
Ostatni post: mikolajseo
11-07-2018, 11:21 PM
» Odpowiedzi: 0
» Wyświetleń: 1,843
Najlepsza metoda nauki ję...
Forum: Angielski w mediach
Ostatni post: mikolajseo
11-05-2018, 08:37 PM
» Odpowiedzi: 0
» Wyświetleń: 888
Powolne i proste ćwiczeni...
Forum: Angielski w mediach
Ostatni post: mikolajseo
11-01-2018, 12:02 PM
» Odpowiedzi: 0
» Wyświetleń: 859
Naucz się angielskiego po...
Forum: Angielski w mediach
Ostatni post: mikolajseo
11-01-2018, 11:35 AM
» Odpowiedzi: 0
» Wyświetleń: 858
Szybka nauka angielskiego...
Forum: Angielski w mediach
Ostatni post: mikolajseo
10-29-2018, 11:05 PM
» Odpowiedzi: 1
» Wyświetleń: 1,513
Jak się uczyć słówek? | P...
Forum: Angielski w mediach
Ostatni post: mikolajseo
10-02-2018, 06:40 PM
» Odpowiedzi: 1
» Wyświetleń: 1,685
Angielska gramatyka – jak...
Forum: Angielski w mediach
Ostatni post: mikolajseo
10-02-2018, 06:27 PM
» Odpowiedzi: 1
» Wyświetleń: 1,477
Angielski: 500 Zwrotów po...
Forum: Angielski w mediach
Ostatni post: mikolajseo
09-26-2018, 08:03 PM
» Odpowiedzi: 1
» Wyświetleń: 1,627
Powolne i proste ćwiczeni...
Forum: Angielski w mediach
Ostatni post: mikolajseo
09-26-2018, 07:59 PM
» Odpowiedzi: 1
» Wyświetleń: 1,775

  China vocal booth
Napisane przez: hjthjt - 05-04-2018, 01:56 AM - Forum: Idiomy - Brak odpowiedzi

Our History
Sai Deli Acoustic division was found at Dongguan in April,2003. Sai Deli became a Ali CTP member in 2007; Dongguan Jinghuan Enviromnet Equipment Co., Ltd was established as a general taxpayer qualification in 2012. Jinghuan had the honor to serve some famous companies such as Toshiba, Toyota, Panasonic through the 15 years experience in this field.
Our Factory
DongGuan JingHuan Environment equipment Co.,Ltd. covers an area of 5000 square meters, is a high-tech enterprise which offers comprehensive services in sound insulation and noise elimination. We create equipment that makes environments optimized under industrial, architecture and medical treatment field. In this entire industry, our name has been highly reckoned as one of the eminent manufacturers and suppliers in China.
Our Product
Full anechoic chamber; hemi-anechoic chamber; precise no sound room; Small Device Test Enclosures; anti-noise covers; Medical test booths; music practice rooms; acoustic doors & windows; Barriers in traffic.
Product Application
Soundproofing services in industry and architectural field, room acoustic treatment services.
Our Certificate
ISO 9001
Production Equipment
Shearing machine; bending machine; air compressor; welder; polishing machine.
Production Market
Asia,Australian; South America; Europe,North America.
Our service
Quality is our cultures, we stick to the aim of customer first, quality first.China vocal booth

Wydrukuj tę wiadomość

  buy Artificial Turf for Landscaping
Napisane przez: hjthjt - 05-04-2018, 01:53 AM - Forum: Idiomy - Brak odpowiedzi

Attractive And Visual Pleasure Artificial Turf Grass For Landscaping
1. Landscaping Artificial Grass Introduction
Artificial grass is considered as the important sign of measuring modern city quality of environment and civilization. So a large fields of artificial grass is moved into public areas landscaping and etc to beautify pleasant mood. Artificial landscaping grass with lush green appearance leaves a impressive feeling of spring. And its less maintenance does not need people to take lots of time to take care of it. The life span is 6-8 years if it used in proper ways. How functional it is.
2. Grass Specification
ItemAttractive    And Visual Pleasure Artificial Turf Grass For Landscaping
Pile height30mm
Tufts/sqm18900(14700,16800    or customized)
BackingDurable    2 layers
GlueBSF    Latex
Roll    Size4m*25m,    2m*25m, or customized
ApplicationLandscape    turf,Home garden grass/lawn, Indoor    floor carpet, Artificial grass/Lawn Roof Decoration
3. Grass Features
This is a typical kind of artificial grass for landscaping. It is gauge of 3/8 inch high density that make a lush green artificial grass with fresh appearance into people’ sight.
The grass yarns are seamed into non-woven by our machine. So there is no worry about whether the grass yarns are easy to fall off from backing. As for the backing, this kind of it is made by two layers: one is composite PP and the other is mesh so quality is guaranteed.
4. Case show
You may not realize how beautiful artificial grass it is when it is moved into landscaping areas. Here are pictures to show its beauty.
5. Hills turf Introduction
As one of the leader manufacturer in Chinese artificial turf industry, Hills Turf is the real expert of Artificial Grass Turf,  our factory was founded in 2002, located in Qingdao, China--the big Sea Port in Eastern China. With rich experience in designing and manufacturing all kinds of professional sports Artificial Turf, landscaping artificial grass, Synthetic lawn, installation tools etc.
Hills turf integrates research and development, design, production, installation and service business together that form a comprehensive industrial company. Company following ISO9000 quality management system certification and ISO14000 environmental management system. We are appraised: as “Qingdao contract-abidance and credit-trusty enterprise”, “Shandong Province contract-abidance and credit-trusty enterprises”, “self-determination import and export enterprise”, “Qingdao foreign economic Trade Enterprises Association member”, etc.
6. Certificates
Customers are more concerned about quality of products. So it is very important to show certificates about our products so that make customers who are interested in our products reassured.
7. FAQ
1. Do I have to replace the entire lawn if only a part of the lawn is damaged?
Generally no. In most cases, only the damaged areas need replacing. It is always a good idea to save an off cut to ensure the same texture and color shading.
2. Can I plant into the artificial grass after installation?
Yes, you can plant certain plants / flowers. Cut the grass to the intended shape. Excavate that area to the desired depth. Follow the usual planting procedures.
3. Can children play soccer on artificial grass?
Yes they can but it’s not advisable to play soccer on artificial grass meant for domestic use.
4. Does artificial grass need watering?
Generally no. However, during the summer months we advise a light sprinkling of water to create moisture with our sand infill to keep the grass cool. buy Artificial Turf for Landscaping

Wydrukuj tę wiadomość

  Granite Titles suppliers
Napisane przez: hjthjt - 05-04-2018, 01:52 AM - Forum: Idiomy - Brak odpowiedzi

Golden Star Building Co.,Ltd. is a wholesales of industrial production and trade as one integrated enterprise in China, we have several production experience and good integrity of the supplier factories. With the rapid growth of China economy, we are becoming a big company, the building materials industry the whole industry chain, including stone mining, processing and other building materials trade.
Our business scope covers marble and granite, board, cut into a certain size, and some other building materials. We have a long supply of various specifications and sizes for large and medium sized projects at home and abroad. In this respect, we have rich production experience and strong productivity. We have ten+ quarries in China. We can provide you with several kinds of stone color selection and guarantee the same quality as samples and delivery in time. The company has introduced the new stone machinery and organized experienced skilled workers to enhance the strength of enterprises in terms of capital, technology, talents, services and production processes, and ensure that every job can meet your requirements.
Our company has always adhered to the concept of "high quality products, on time delivery, customer satisfaction". Your trust and support are the impetus for us to keep the lead in our work.Granite Titles suppliers

Wydrukuj tę wiadomość

  good quality fibre reinforced polymer rebar
Napisane przez: hjthjt - 05-04-2018, 01:51 AM - Forum: Idiomy - Brak odpowiedzi

We specialize in the production of GFRP for metro and obtain the unanimously approved of client. And the GFRP for meto meet the international safety standard of CJJ-T192-2012 and JGT 406-2013. The product can be used for replacing the steel rebar as it get the advantage as composite material and gain the good appraisement by the customer.
(1)High Corrosion Resistance:The base materials which is used by the bolt are durable materials, also they are molded through the composite process. The service life is over 100 years. They can be thought as permanent support materials;
(2)Cuttability: It avoids damages to cutter heads, and does not delay excavation;
(3)Anti-static:It has no electrical conductivity, and no sparks will be produced when being cut. It is particularly suitable for high gas zones;
(4)Low Weight:The weight is only 1/4 that of a steel bar with the same diameter. Therefore, the labor intensity is greatly reduced, and the transportation cost is reduced at the same time;
(5)Non-flammable: It is non-flammable and has high thermal isolation;
(6)High Tensile Strength:The load is approximately double that of a steel bar with the same diameter
Type No.Diameter (mm)Ultimate tensile strength (MPa)Modulus of elasticity (GPa)Ultimate shear strength (MPa)
NO.Standard numberStandard name
1GB 50608-2010Technical code for infrastructure application of FRP composites
2JG/T406-2013Glass fibre reinforced plastics rebar for civil engineering
3ISO 10406-1-2013Fibre-reinforced polymer (FRP) reinforcement of concrete. Test methods. Part 1:FRP bars and grids
4ACI 440.3R-04Guide Test Methods for Fiber-ReinforcedPolymers (FRPs) for Reinforcing orStrengthening Concrete Structures
5CSA-S806-02 -2002Design and Construction of Building Components with Fibre Reinforced Polymersgood quality fibre reinforced polymer rebar

Wydrukuj tę wiadomość

  Przelewy internetowe pod Twój sklep
Napisane przez: albert432 - 04-25-2018, 09:54 AM - Forum: Zapytaj Deana - Odpowiedzi (2)

Jeśli szukacie bardzo dobrej jakości obsługi przelewów internetowych pod wasz sklep internetowy https://www.eservice.pl/produkty-i-uslugi/platnosci-internetowe/kanaly-platnosci/ to polecam przelewy online świetnej jakości przelewy, które możecie podpiąć pod wasz sklep, super niskie prowizje i pełne wsparcie które gwarantują to dodatkowy atut !

Wydrukuj tę wiadomość

Tongue Najlepsza metoda nauki angielskiego
Napisane przez: mikolajseo - 04-22-2018, 07:40 PM - Forum: Angielski w mediach - Odpowiedzi (4)

Dąb Solony Salt Oak

Wydrukuj tę wiadomość

  buy discount printed woven bag
Napisane przez: SMvqL520 - 04-20-2018, 08:18 AM - Forum: Zapytaj Deana - Brak odpowiedzi

flower design pp woven shopper bag
handle:pp webbing
Printing :CMYK
pcs/package : 12 pcs/bial .144 pcs/package
size :60*70*30cm
Lower price ,high quality .buy discount printed woven bag

Wydrukuj tę wiadomość

  cheap Hi vis bands
Napisane przez: SMvqL520 - 04-20-2018, 08:17 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Ankles Wrists Arms Reflective Bands for Running, Cycling, Walking, or Hiking
The bands are 13.5 inches long with one Velcro strip measuring 5 inches long. This extra-long Velcro strip allows these bands to be adjusted to fit ankles and wrists with diameters between 7 to 12 inches. They can be adjusted to fit snug or loose depending upon personal preference. The bands also work well over clothing and can double as a reflective pant strap for cyclist. Larger/muscular individuals can combine two bands to form one large band for a bicep fit. This technique also works well when desiring to use these bands during winter months while wearing thicker clothing. When using this technique I would recommend putting the bands together first and then sliding them on like a sleeve.
Any question about our fluorescent reflective vest.please send your inquiry details in the below,click "send" now, we will reply to in time.
1.Manufacturer & trading company
2.10-year export trading experience
3.Low MOQ
4.good quality, competitive price, outstanding Service, delivery on time
5.EN ISO 20417: 2013, AS/NZS 4602.1:2011, ANSI/ISEA 107-2010, OEKO-TEX 100 etc certified
6.R&D team with continuous develop new products
Q:Are the materials safe? Any test for them?
Yes, they are. We use the safe materials base on EN ISO 20417: 2013, CE, ANSI/ISEA 107-2010
Q: Are you a direct manufacturer?
Yes, we are an experienced manufacturer with 8 years history.
Q: Do you have QC management system?
Yes, we have IQC( Incoming Quality Control) PQC(Producing Quality Control), IPQC(Input Process
Quality Control), LQC(Line Quality Control) and FQC(Final Quality Control).
Q: Can we buy samples and bulk orders in Alibaba?
Yes, you can. Just click the option of Start Order.cheap Hi vis bands

Wydrukuj tę wiadomość

  paper cup sleeve in stock
Napisane przez: SMvqL520 - 04-20-2018, 08:15 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Company information
Established in 2015.
Management with 40 years experience in packaging & disposables, 20 years in sourcing Asian manufacturers.
Office + warehouse in Hangzhou, China
Business concept – Sales
Offer a competitive range of disposables and packaging.
Direct from manufacturers to wholesalers and big consumers in the world.
Small and flexible organization, with focus on sales, customer support and technical information solutions.
Co-operation/partnership together with a strategic choice of local wholesalers.
Business concept – Purchase
Search competitive groups of products and establish contacts with manufacturers in Asia, through comprehension of culture and tradition.
Build up significant trade volume, with focus on growth and profitability, together with a limited number of manufacturers.
Create long-term relationships and forecast orders for delivery by container direct to warehouse.
Focus on contacts with manufacturers, knowledge of language, logistics, product development and quality control.
All products are packed in neutral polybags/boxes/outer cartons and are normally produced to order which makes individual specifications possible, as bulk pack, consumer pack or individual pack.
Products are marked/labeled with article no, specification in English, symbol for food-contact with glass/fork and barcode (GTIN).
13-digits barcode (EAN-13) on inner bags/boxes and 14-digits (ITF-14) barcode on outer cartons, which make sales to stores, cash-carry etc possible.
Code of conduct (extract)
Hangzhou Tic Tac Packaging Products Co., LTD is a commercial and trading company dealing in disposables and packaging. Appreciative of cultural values and traditions, the company primarily represents Asian producers.
Tic Tac Packaging has created a strategic network of diverse interested parties using a business concept based on simplicity, flexibility and accessibility.
Tic Tac Packaging is to reduce global distances by offering an attractive line of competitive products without compromising on quality, product demands, working conditions, employee rights or protection of the environment.
The Tic Tac Packaging Code of Conduct describes the requirements and expectations we impose on ourselves as well as on our suppliers and their subcontractors.
We expect suppliers to respect the requirements and principles laid out in this Code of Conduct and to actively strive to implement these principles in their own operations.paper cup sleeve in stock

Wydrukuj tę wiadomość

  china cnc machining shop suppliers
Napisane przez: SMvqL520 - 04-20-2018, 08:14 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Turn your papers into parts from 1-100,000 pcs  !
Molto group invests in high tech CNC machines like Mitsubishi multi axis CNC centers (3, 4 and 5-axis CNC machining centers), lathes, EDM/Wire EDM, Grinders and much more, which will ensure each tight tolerance precisely in products. CNC precision machining is fast turnaround, economical and accurate to meet a range of your product development needs. We use precision machining not only to manufacture parts and prototypes but also to make mold tools for injection molding and die casting. At Molto, our project engineers and machinists will always beside you to optimize time, surface finish, final tolerance to find out the best solution for you.
Rapid manufacturing
Molto focus on CNC prototypes including plastic and metal prototypes. We have acquired a great deal of experience in medical machining, aerospace machining, automotive machining, micro machining and large machining for complex parts. Molto is able to provide precision machining service for mold and mold components casting parts, volume sheet metal and extrusion parts. Molto inspects all input raw material to guarantee it is real. Our experts will assist you to make out the best material for your cost, weight and engineering application needs.
Surface finish service
Our engineers are dedicated to providing you with the perfect appearance of prototypes and volume products. Our abundant surface finish art can not only meet your appearance needs, but also meet the specified  performance requirements. You can choose from anodizing, polishing, passivating, chrome plating, laser engraving, brushing, powder coated, heat treatment and much much more.
Mirror Polishing –polish process to achieve smooth, bright mirror-like surface. Mirror polished includes mechanical mirror polishing and chemical mirror polishing, the product surface is as smooth as the mirror, which can reach Ra0.2 or below.
Anodizing –produce a layer of oxide film on surface for protection, decorative and other features. A lot of colors are availble in anodizing, most common colors are natural and black. We can custom your favorite color if you provide the color NO. in RAL chart.
Sanding–Blast sand on product surface by jet high-speed to obtain a certain degree cleanliness and roughness, and improve mechanical properties.
Powder Coat–Powder is coated on the product surface by discharge phenomenon. Powder is dispersed under high voltage through the electric field and coated on the product surface. Our powder coating service is environmental, anti-heat and anti-shake.
Painting – Spray layers of paint on the product and dry it with high temperature. You can according to RAL card or Pantone color chart to customize any of your favorite colors.
Quality inspection & testing
Making precise parts need well-controlled processing with excellent inspection tools and equipment. Molto has measuring and testing equipment onsite to qualify incoming materials, modern laboratory can guarantee that your products can really meet the specifications.
Design review when quoting
Contract review with PO
Incoming materials inspection
In-process inspection
Output final inspection and testingchina cnc machining shop suppliers

Wydrukuj tę wiadomość