Witaj, Gość
Musisz się zarejestrować przed napisaniem posta.

Użytkownik
  

Hasło
  





Szukaj na forum

(Zaawansowane szukanie)

Statystyki
» Użytkownicy: 10,172
» Najnowszy użytkownik: Dowkeraq1
» Wątków na forum: 340
» Postów na forum: 502

Pełne statystyki

Użytkownicy online
Aktualnie jest 58 użytkowników online.
» 0 Użytkownik(ów) | 58 Gość(i)

Ostatnie wątki
Podstawowe zwroty po angi...
Forum: Angielski w mediach
Ostatni post: mikolajseo
06-02-2022, 06:08 PM
» Odpowiedzi: 0
» Wyświetleń: 566
4 podstawowe czasy angiel...
Forum: Angielski w mediach
Ostatni post: mikolajseo
06-02-2022, 06:06 PM
» Odpowiedzi: 0
» Wyświetleń: 643
Angielski Online #1: Ćwic...
Forum: Angielski w mediach
Ostatni post: mikolajseo
06-02-2022, 06:05 PM
» Odpowiedzi: 0
» Wyświetleń: 591
Angielski dla początkując...
Forum: Angielski w mediach
Ostatni post: mikolajseo
06-02-2022, 06:01 PM
» Odpowiedzi: 0
» Wyświetleń: 588
Angielski dla początkując...
Forum: Angielski w mediach
Ostatni post: mikolajseo
06-02-2022, 05:59 PM
» Odpowiedzi: 0
» Wyświetleń: 601
120 czasowników nieregula...
Forum: Pomoc językowa
Ostatni post: mikolajseo
05-12-2022, 08:07 PM
» Odpowiedzi: 0
» Wyświetleń: 565
120 najczęściej używanych...
Forum: Pomoc językowa
Ostatni post: mikolajseo
05-12-2022, 08:05 PM
» Odpowiedzi: 0
» Wyświetleń: 588
100 najczęściej używanych...
Forum: Pomoc językowa
Ostatni post: mikolajseo
05-12-2022, 08:04 PM
» Odpowiedzi: 0
» Wyświetleń: 574
1000 najczęściej używanyc...
Forum: Pomoc językowa
Ostatni post: mikolajseo
05-12-2022, 08:03 PM
» Odpowiedzi: 0
» Wyświetleń: 594
Angielski na lotnisku - T...
Forum: Pomoc językowa
Ostatni post: mikolajseo
05-12-2022, 07:35 PM
» Odpowiedzi: 0
» Wyświetleń: 594

 
  Customized DIN titanium/Ti washers
Napisane przez: ytr908 - 03-07-2018, 08:22 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Bao Ji AATI New Metal CO.,LTD. (AATI) is a high –technology enterprise which is specialized in the production, research and development of  nonferrous metal such as Ti, Zr, Ni, Cu etc. The company was established in 2007, which has become an export-oriented enterprise with yield of more than 600 tons a year.
Our Certificate
AATI had owned the autonomous authority of export management that approved by government, and had qualified for certification of ISO9001, ISO2000 quality management.  And AATI has also been granted ISO14001-2004 Environmental Management System Certification. The products of cladding copper with titanium have a number of national invention patents, possessed independent intellectual property rights, gained the high reputation at home and abroad in PCB and electroplating equipment industry.  AATI has been listed the first batch of encouraged development industry by National Development and Reform Committee and had gained preferential treatment of duties.
          Our Product
      We have three kinds of main products.
(1) cladding copper with titanium as the major products, including cladding Cu with titanium, zirconium, stainless-steel, nickel, and  Niobium and cladding Al with titanium, and stainless-steel, and cladding copper tube with titanium and cladding stainless-steel tube with copper and also cladding stainless-steel with copper and titanium for three layer compound.
(2) Series of standard titanium, zirconium and nickel products such as Ti tubes, bars, wires, plates and fasteners, etc.
(3) Series of special titanium and zirconium products such as Ti baskets, Zr baskets, Ti tabs, Ti gussets, Ti hook support straps, Ti heating coils tubes, stainless-steel heating coil, etc.
Production Market      
As relying on the universities and industries in Xi’AN, AATI has rich qualified scientists and technicians, advanced technology and equipments, complete quality assurance systems, and our products have been sold to Europe, America,  Brazil, Peru, East Asia, South Africa, Taiwan, widely used for electron, plating, petrol-chemical and chemical industry, energy source projects, coking, papermaking, salt-making, ocean projects, wet metallurgy, surface treatment, pharmacy and medical treatment, electrode-making, coating film etc., which produced a lot of economic and social benefit. Customized DIN titanium/Ti washers
website:http://www.aatiticladcu.com/.

Wydrukuj tę wiadomość

  cheap zinc sheet
Napisane przez: ytr908 - 03-07-2018, 08:20 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Our History
Henan Guoxi Ultra-pure New Materials Co., Ltd was established in June of 2012 by several experts who are studying Material Science Major from School of Material Science and Engineering (SMCE) at Central South University, which covers an area of 110,000 square meters, its registered capital is 12,000,000.00usd.
The industrialization project of our ultra-pure metal materials is located in the chain front of  advanced manufacturing and high-tech industry.We research and develop independently new generation of 5N and 6N (purity ≥ 99.9999%) ultra-pure zinc, copper and other ultra-high purity metal materials technology in scale production,our products have been applied to the field of advanced manufacturing,military sector, semiconductor,and so on.
Our Factory
Henan Guoxi Ultra-pure New Materials Co., Ltd. is a high-tech enterprises which is committed to researech and develop high-quality super pure metal materials in large-scale production.
Guoxi has established an innovative and complete producing, researching and selling system, which is oriented by the marketing development, based on the research resource of university and guided by the direction of industry. Our main products cover most of metal thin film materials such as metal sputtering targets, metal alloy sputtering targets, arc cathodes, high purity evaporation materials and backing plates, together with metal crucible liners. Now, our products have already been exported to Korea, Japan, America, Europe and Middle East, and it’s good quality, competitive price, timely delivery and best after-sales service are highly appreciated by our customers.
Our Product:
Guoxi Products includes the following:
1, High purity copper
2, High purity Zinc
3, High purity aluminum
4, Alumina ceramic powder
As a high technology company integrating production, teaching and research, Guoxi Ultra-Pure is engaged in producing and selling the most suitable and high quality 6N(purity≥99.9999%)zinc,copper,nickel,and other ultra-pure metal material.
Product Application
High-pure cathode copper is used in plasma deposition (sputtering) processes, including the manufacture of semiconductors and superconductor components, as well as in high vacuum devices such as particle accelerators. In any of these applications, the release of oxygen (and/or other impurities) can cause undesirable chemical reactions with other materials in the local environment.
--Welding Torch Tips
--Switch Gears
--Bolts
--Studs
--Soldering Copper
--Relay Parts
--Electrical Switches on Power
--Semiconductors
--Fasteners
--Transformers
--Circuit Breaker Terminals
--Electrical Connectors
--Transistor Bases
--Gas Cutting Nozzles
--Motor Parts
--Switch Parts
--Soldering Tips
--Furnace Brazed Parts
--Screw Machine Products
--Forgings
--Plumbing Fittings
--Sprinkler Heads
--Fixtures
--electronic chemical materials
--special alloy material
--Polyurethane scooter wheels and skate wheels, which from our second production line, are widely used for children playing scooters and skate shoes.  
Our Certificate
Our Company have manufactured the batch productionof 6N high purity copper and zinc at present , now our products have been applied in high-class manufacturing fields and national defense department and get good Economic benefit and social benefit.< Henan Guoxi Ultrapure New Materials Project Technology Research Center> was built under every government department support,we will improve mechanism of innovation better and better.We achieved two scientific research international advanced achievements: 《Large-scale producing 6N high purity zinc project technology》and《Large-scale producing 6N high purity copper project technology》, eight utility model of patents and two invention patents in 2015.Our company have the honor to be selected to 《military industrial products recommended catalog》,we also actively promote civil-military integration depth.
Our company own province-class ultra purity metal research centre,we get core technology of more than ten independent intellectual property rights and self-management import and export rights by researching and developing ourselves.We pass SGS and ISO quality system certificate ,also biography 《Recommended Tissue List of Military Products》.
Production Market
Now our 99.9999% high purity copper has been exported to America and Russia,6N copper pellets is sold to Canada and Korea,high purity copper ingot is now also in Japan market for bonding wires.
We are striving to seeking for higher overseas market ,also want to expand our market to other country.
Our service
1.before sales,we are strict to adhere ISO quality management system;
2.in sales,we check every batch of products for better packages;
3.after sales,we have professional steam tto serve for you everyday.cheap zinc sheet
website:http://www.6nmetal.com/
website2:http://www.6ncu.com/.

Wydrukuj tę wiadomość

  Slant Bed Lathe Machine
Napisane przez: fangbaby1392 - 03-05-2018, 08:18 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Name: JD36P slant bed high-speed CNC machine tool
Product introduction
The characteristics of the high speed, high precision, high rigidity, stability and reliability of the high speed CNC lathe.Adopt Taiwan famous brand roller guide rail, heavy cutting processing.The power head can be milling, drilling, tapping, boring, reaming, and car processing.
Main technical parameters
The maximum rotary diameter of the bedmmɸ500
The maximum turning diameter of a mopmmɸ200
Maximum Z travelmmStandard390/longer470
Maximum X strokemm600
Fast moving speedm/minX:24 z:24
Diameter of spindle holemmɸ56
Spindle motor powerkw5.5servo
Spindle speedrpm5000
Cutter areamm20x20
X, to the torque of the motornm7.7nb 7.7n
X, to connect the Z to the motor Straight league
X, to the z-bar specifications X:2510 z:3210
X, to Z to roller rail specifications X:25 z:30
Repeat positioning accuracymm0.002
Positioning accuracy (machine precision)mm0.01
The spring clamping specification ɸ65chuck M55drawn tube
Chuck specificationsmmɸ200/ɸ160(8”/6”)
Hydraulic rotary oil cylinder specification (hollow)-646(can pass ɸ46 within the bar)
Cooling water pump powerw220w
Machine weightkg≈2500
Machine dimensionsmm≈2150x1700x1800
Main configuration
Absolute value servo system of Beijing kaine emperor bus (or selected Taiwan)
Resin sand casting (domestic)
Main shaft (domestic brand or choice of Taiwan)
Automatic lubricating system (domestic)
Special bearing of screw rod (inlet)
Linear guide (Taiwan)
Hydraulic clamping system (domestic or selected Taiwan)
Blade rack (optional multi-station servo knife tower in Taiwan)
Main motor (servo motor)
Main electrical components (snyder)
According to the requirements of the customer, the selection

Equipment details

The main shaft maintenance should be paid attention to before and after maintenance
The following points should be noted before and after maintenance:
1. Be safe before maintenance.Ensure personal safety and equipment safety;Verify that the input power supply is completely disconnected to do the operation, otherwise there is a danger of electric shock.For example, the emergency stop button on the action panel should be quickly loosened.
2. Before maintenance, make proper use of the hygiene around the machine tool to prevent the disassembly of parts and wastes.See whether machine tool enjoys "county class" treatment, be affected by environment whether very big.
3. Before maintenance, relevant preparations should also be made.For example, whether the tools are at hand, whether there are clean rags, whether there are barrels or boxes of containers, mainly for fear that during the removal process, oil, water, etc., will be left on the ground.
4. Be familiar with the working principle of CNC system, driver, mechanical and electrical parts before maintenance.
5. Before the repair, should observe the product, to see if the product deformation, burr is big, is the cause of the blade gap big or knife shield, whether the operator caused by wrong operation and so on, to listen to the voice of the machine tool, machine tool has been stuck there is no clear in time, check whether the screw is loose, whether there is a shift phenomenon.The external solution, if the product is deformed, will consider the material problem.
6. In the maintenance, the simple problem should be started before the general special.
7. During maintenance, it should be divided into pieces to see if it is the problem of oil, water, electrical, mechanical, etc., to determine the direction of investigation.
8. When repairing, if it is to be removed, a positioning value should be removed. When it comes to the assembly problem, it cannot be removed directly, and the parts should be marked to prevent the change.In order to avoid "easy to break down, difficult to install", it is important to consider the precision of the machine tool.
9. After the repair, check the oil circuit, whether all the water is open, whether there is a tool to forget in the machine, and cause another failure.After confirmation, electricity, water, oil, etc., in operation, check if there are other problems.
10. The maintenance of machine tools is now "change work", because it can improve the production efficiency, shorten the average repair time, improve the maintenance level, replace the template, and then slowly repair.
11. During the actual maintenance process, there may be multiple failures at the same time. I feel that as long as the machine tool is repaired, a variety of methods will be used
FAQ:
Q: Are we a trading firm or a manufacturer?
A: We are a MANUFACTURER.
Q: What’s our payment mode?
A: L/C, T/T
Q: Can machines be customized?
A: YES.
Q: How long is the warranty period?
A: 12 months.Slant Bed Lathe Machine
website:http://www.brass-valve-machine.com/cnc-machine/slant-bed-lathe-machine/

Wydrukuj tę wiadomość

  China Flat Or V Shape Metal Wire For SWG
Napisane przez: fangbaby1392 - 03-05-2018, 08:17 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Our History
NINGBO BOTE AUTO SEALING CO.,LTD. (Ningbo Guangyi Sealing Material Co., Ltd. is a franchise subsidiary) was established in 1990, covers an area of 15500m2, of which construction area of 20000m2, professional commitment to automotive, petroleum, shipbuilding, metallurgy, chemical, machinery And other related areas of gaskets, sealing filler research and development, production, sales and service.
The company has advanced technology, fully automated production equipment, unique production technology and improve the quality management system, in 1998 passed the ISO 9001 quality certification, in 2003 through the ISO / TS 16949 quality certification, and strictly control the quality of products.
The company as a professional seal production and export enterprises, long-term for China FAW, Tianjin Toyota, SAIC-GM-Wuling, Great Wall, Geely and other domestic more than 10 original car factory matching, and a large number of exports to the United States, Canada, Europe, the Middle East, South Korea, etc. Countries and regions.
Company to "pioneering and enterprising, truth-seeking, innovative" concept for the new and old customers around the world to provide quality products and first-class service!
Sincerely welcome domestic and foreign customers to plant inspection cooperation.
Our Product
Sealing gasket: metal wound pad, metal tooth pad, metal corrugated pad, metal ring pad, metal coated pad, high strength graphite gasket, non-metallic gasket
Car gasket: exhaust pipe spherical pad, exhaust pipe flat gasket, W-type winding pad
Graphite packing ring: pure graphite packing ring, steel reinforced graphite packing ring, corrosion-resistant graphite packing ring
Car chassis heat shield
Product Application
Automobile, oil, ship, metallurgy, chemical industry, machinery
Our Certificate
ISO 9001,ISO/TS 16949,ISO 9001, ISO / TS 16949, Special equipment manufacturing license
Production Equipment

Production Market
Long-term for China FAW, Tianjin Toyota, SAIC-GM-Wuling, Great Wall, Geely, and other domestic more than 10 original car factory matching, and a large number of exports to the United States, Canada, Europe, the Middle East, South Korea and other countries and regions.
Our service
Our aim is: Quality,Price,Delivery time, we can do it perfect.
China Flat Or V Shape Metal Wire For SWG
website:http://www.botegasket.com/
website2:http://www.boteautogasket.com/

Wydrukuj tę wiadomość

  UL SVT manufacturers
Napisane przez: fangbaby1392 - 03-05-2018, 08:15 AM - Forum: Zapytaj Deana - Brak odpowiedzi

UL SVT electrical wire PVC insulated
Application:
UL SVT electrical PVC insulated cable used as power cable connection of small appliances and home appliances.
UL File Number:E491070
Style SVT
Reference standard: UL 62
Product Description:Cross section:
Number of conductors: 2 or 3
Size of Conductors: 18AWG~16AWG,Stranded / Bare copper & Tinned copper
Rated temperature: 60, 75, 90 & 105℃, 300V
Insulation: Extruded PVC, Minimum average thickness 0.38mm; Minimum thickness at any point 0.34mm; Minimum thickness at point of contact 0.30mm.
Filler (Optional): Cotton yarn.
Tape (Optional): Cotton paper or Non-woven fabrics.
Jacket: Extruded PVC, Minimum average thickness 0.76mm; Minimum thickness at any point 0.61mm.
Flame test: UL VW-1, CSA FT1
Environment protection: RoHS / REACH
Package: 500FT&1000FT Roll/wooden drumUL SVT manufacturers
website:http://www.biadi-cable.com/ul-wire/ul-svt/

Wydrukuj tę wiadomość

  China 150 Liters Dental Air Compressor manufacturers
Napisane przez: fangbaby1392 - 03-05-2018, 08:12 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Our History
The Best Dent brand is engaged in researching , development, production and marketing of dental equipments, including portable dental units , silent oiless dental air compressor , dental units , dental suction systems and autoclaves /sterilizers etc.
The dental equipment awards the ISO 13485 ,CE certificate . Best Dent team will provide you with marketing materials , logistics as well as with technical and commercial training . Our team strives to provide top-notch service to meet your requirement.
We have a team of experienced R&D engineers and skilled staffs, so we are able to supply you the products in high quality at competitive price and on time delivery .
We are sincerely hope all customers in the world to be our partners.
Our Product
Portable dental unit , Silent oiless air compressor , Suction unit , Dental unit
Product Application
Suitable for home service, external examination, beauty salon, hospital reserve, animal hospital, etc...
Our Certificate
CE, ISO 13485
Production Market
Selling the products all over the world and have 98% good feedback from the customers
Our service
1. 1 year quality warranty for all dental equipments.
2. Full way services and technical support offered by our professional engineers.
3. Your goods could be shipped as your requirement such as by air or by sea or you can also arrange your own shipping agent for shipment
 China 150 Liters Dental Air Compressor manufacturers
website:http://www.bestdentalunit.com/

Wydrukuj tę wiadomość

  Customized PDC Inserts
Napisane przez: fangbaby1392 - 03-05-2018, 08:10 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Besharp Diamond was established in 2010,located in the cradle of Chinese Kongfu-Zhengzhou,.The company has the modernized standard workshop 23000 square meters and R&D center 2000 square meters,as a leading famous producer and supplier in diamond industry in China, Besharp Diamond is to create added value for customers around the world.
Besharp Diamond products includes the following:
PDC drill bits
PDC cutters
PCD blanks
PCD cutting tools
Diamond grinding wheels
We supply diamond products all over the globe to a wide range of companies worldwide, ranging from large multinational organizations to small individual companies.
Our products are widely used in the following industry, such as :
---Coal Mining,Water well drilling,geothermal well drilling,geological exploration,utility work
---Oil gas drilling, concrete floor grinding,stone quarry
---Cutting industry like
---Grinding industry like tungsten carbide,fiber glass,ceramic,etc.
We have more than 80 sets of production and processing equipment,include Furnace,High frequency welding machine,heat treatment Furnace,CNC lathe,axis machining center,cubic press, grinding miller,polishing machine,CNC surface grinding machine,laser cutting machine,Precision microscope and measuring instrument,etc.
We have approved IS09001:2008 Quality System Certificate and CE Acceptance, owns the self-operation import and export right, our products have exported to USA, Russia, West Union,Australia,,Mideast, South Africa ,Southeast Asia more than 30 countries and regions.
We take the quality as the fundamental,customer-oriented,with technology innovation as the core concept,aiming to supply the premium quality products and service to the customers at home and abroad.Customized PDC Inserts
website:http://www.besharpdiamond.com/

Wydrukuj tę wiadomość

  China Universal Valve Lockout suppliers
Napisane przez: fangbaby1392 - 03-05-2018, 08:09 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Product DescriptionChina Universal Valve Lockout suppliers
website:http://www.beianlock.com/safety-valve-lockouts/universal-valve-lockout/

Wydrukuj tę wiadomość

  Servo Frein For Volkswagen manufacturers
Napisane przez: fangbaby1392 - 03-05-2018, 08:06 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Our History
Our company was establish in 1995, it has more than 20 years manufacturing history for brake booster, now it has about 80 employees,and covers more than 12000 square meters.
Our Factory
Our company is located in Wenling City, Zhejiang Province, near to Wenzhou and Yuhuan, it is convenient to visit to us. We are an OEM supplier, and now we are capable of producing about 40000 brake booster per month.
Our Product
Brake booster, vacuum booster, clutch booster, air master, master cylinder.
Product Application
TOYOTA, NISSIAN, ISUZU, MITSUBISHI, SUZUKI, HINO, DAIHATSU, HYUNDAI, KIA, LADA, PEUGEOT, RENAULT, FIAT, FORD, CHEVROLET, GMC.
Our Certificate
ISO 9001:2000
Production Equipment
6 assembly lines, 8 testing equipments.
Production Market
Our sales market is for the whole world, and now have customers in almost each county, the major markets are USA, Turkey, Algeria, Iran, Philippines, Indonesia, Vietnam, Malaysia, Tanwan, Thailand, Brazil, Panama.
Our service
Our salesmen and engineers will trace the pre-sales, selling, and after sales in each order.Servo Frein For Volkswagen manufacturers
website:http://www.aydbrakebooster.com/

Wydrukuj tę wiadomość

  China King Size Pillow Top Spring Mattress manufacturers
Napisane przez: fangbaby1392 - 03-05-2018, 08:04 AM - Forum: Zapytaj Deana - Brak odpowiedzi

Founded in 2005, AH has been specializing in design, manufacture and sell of mattress. From selected material to authoritative certificates, from skilled workers to advanced equipment, from professional sales to quality services, we are committed to providing every customer with the most satisfied products and services, also a new superior sleep experience for final users.
AH is located in Dalian, China, 25km from Dalian Port, here has developed shipping, convenient transportation network and the best air conditions for mattress.
Besides, our one-stop services including pre-sale, on-sale and after-sale guarantee customers the maximize satisfaction and benefits.
AH has family culture, just like our logo, thanksgiving and altruism are our team tenets. We’d love to transfer AH positive energy to everyone.
If you are interested in our products, we believe that we will offer our professionalism and sincerity, to achieve win-win cooperation.
China King Size Pillow Top Spring Mattress manufacturers
website:http://www.amorhome.com/

Wydrukuj tę wiadomość